Aquaphor Waterboss 900 Water softener and iron remover

Aquaphor Waterboss 900 is a versatile unit that combines a mechanical self-cleaning filter, iron remover and water softener. WaterBoss represents an evolutionary step in water treatment systems. WaterBoss uses a number of technologies that make it unique. The main ones are the patented design of the control valve, ultrafine ion exchange resin, and an innovative design of the drainage and distribution system. High reliability is ensured by the minimum number of moving parts.
This system is currently the most compact and efficient on the market for cottage and "apartment" water treatment. Usually, for the installation of water treatment equipment, it is required to reserve a special place at the design stage of the facility. And if for some reason this did not happen, it can be very problematic to "fit" the water treatment system into the finished project. Unique compactness, modern design and high performance characteristics make it possible to use AQUAPHOR WaterBoss 700 even where a special place was not provided in advance. Another indicator - the extremely small amount of water consumed for regeneration - is very important in the presence of a local sewerage system and a water meter. The AQUAPHOR WaterBoss softening and iron removal system is simple and easy to maintain, and also outperforms conventional water softeners in all major categories. Once installed, the system only requires periodic refilling with salt.
Ion exchange resin: WaterBoss softeners use a monodisperse ion exchange resin with a bead diameter of about 0.2 mm. A narrow fractional composition in combination with a small granule size makes it possible to obtain a sorption (ion-exchange) medium with a very low hydrodynamic resistance and a very high kinetics of the ion-exchange reaction. The use of such an ion exchange resin in conventional bulk columns is not possible, since the standard “slits” at the column inlet and outlet have a slot size of 0.5 mm. Construction: The ion exchange resin in WaterBoss is tightly packed between two polymer meshes with a mesh size of 20 microns and an area close to the column diameter. Due to this, there are no parasitic stagnant resin volumes that are not involved in the filter. Efficiency of regeneration: The WaterBoss system implements counter-current regeneration "in the clamped layer", which is impossible with free filling of resin due to the floating effect. This achieves significant - up to 70% - saving of salt during regeneration.
WaterBoss 900 - Specifications:

Aquaphor Waterboss 900 is a versatile unit that combines a mechanical self-cleaning filter, iron remover and water softener. WaterBoss represents an evolutionary step in water treatment systems. WaterBoss uses a number of technologies that make it unique. The main ones are the patented design of the control valve, ultrafine ion exchange resin, and an innovative design of the drainage and distribution system. High reliability is ensured by the minimum number of moving parts.
This system is currently the most compact and efficient on the market for cottage and "apartment" water treatment. Usually, for the installation of water treatment equipment, it is required to reserve a special place at the design stage of the facility. And if for some reason this did not happen, it can be very problematic to "fit" the water treatment system into the finished project. Unique compactness, modern design and high performance characteristics make it possible to use AQUAPHOR WaterBoss 700 even where a special place was not provided in advance. Another indicator - the extremely small amount of water consumed for regeneration - is very important in the presence of a local sewerage system and a water meter. The AQUAPHOR WaterBoss softening and iron removal system is simple and easy to maintain, and also outperforms conventional water softeners in all major categories. Once installed, the system only requires periodic refilling with salt.
Ion exchange resin: WaterBoss softeners use a monodisperse ion exchange resin with a bead diameter of about 0.2 mm. A narrow fractional composition in combination with a small granule size makes it possible to obtain a sorption (ion-exchange) medium with a very low hydrodynamic resistance and a very high kinetics of the ion-exchange reaction. The use of such an ion exchange resin in conventional bulk columns is not possible, since the standard “slits” at the column inlet and outlet have a slot size of 0.5 mm. Construction: The ion exchange resin in WaterBoss is tightly packed between two polymer meshes with a mesh size of 20 microns and an area close to the column diameter. Due to this, there are no parasitic stagnant resin volumes that are not involved in the filter. Efficiency of regeneration: The WaterBoss system implements counter-current regeneration "in the clamped layer", which is impossible with free filling of resin due to the floating effect. This achieves significant - up to 70% - saving of salt during regeneration.
.png)
WaterBoss 900 - Specifications:
- The total maximum compensated hardness (Fe + Mn + Ca), mgeq / l * 31
- Maximum content of iron and manganese ions in water, mg / l 10
- Minimum pH 6
- Backfill type and amount Filter medium
- Power Clean Super Fine Resin - 28.3 L
- Salt consumption, kg / Resin capacity, mg-eq (HC - high capacity) 3.41 / 29900
- Salt consumption, kg / Resin capacity, mEq (NOT - high efficiency) 2.72 / 31324
- Working water temperature, ° С 3 - 49
- Working capacity, m3 / h 1.8
- Filter tank size, cm 26.7 x 53.4
- Maximum productivity, m3 / h / pressure drop, atm 3.6 / 1.03
- Pressure drop with flow 0.91 m3 / h 0.28
- Maximum drainage flow during regeneration (backwash), m3 / h 0.5
- Water pressure (minimum / maximum), atm 1.4 / 8
- The minimum required water flow, atm 1.14
- Maximum chlorine content, mg / l 1
- Processor type 4-button
- Regeneration time, min (HC - high capacity) 48
- Regeneration time, min (NOT - high efficiency) 38
- Water consumption for regeneration, l (HC - high capacity) 125
- Water consumption for regeneration, l (NOT - high efficiency) 102
- Regeneration frequency, days By counter;
- By the counter at a given time
- Salt reserve, kg 73
- Height, cm 78.1
- Base, cm 37.5 x 47.6
- Power supply 220/12 VAC, 1 phase, 50Hz
- Connecting dimensions ¾ "NMPT
- Gross weight, kg 48