Aquaphor WaterBoss 400 Iron remover and water softener.
Aquaphor WaterBoss 400 - designed for water softening, manufactured by order of Aquaphor by the American company "Hague Quality Water International" (Water Boss). This softener is used to remove hardness ions of magnesium and calcium, remove manganese and iron from the water of local and municipal water supply networks (wells, artesian wells, etc.)
How the WaterBoss water purification system works
The main advantage of the new model is its ultra-compact dimensions, which provide ease of placement and installation and save space in your home or apartment. At the same time, in terms of efficiency, this "crumb" is practically in no way inferior to its "large" brothers.
Aquaphor WaterBoss 400 is designed to provide your families with clean, soft, delicious water. For its creation, the best materials and modern equipment were used, which ensures the smooth operation of the system for many years.
The filter is certified according to the Water Quality Association S-100 standard, which is confirmed by the Gold Seal of the Water Quality Association. All electrical products and components used are CSA and UL listed, and all water-contacting components are FDA-listed. The materials from which the softener is made are non-toxic, absolutely safe and do not emit any substances into the water that pose a danger to human health and the environment. The filter fully meets the requirements of the technical regulations TR CU 010/2011.
Aquaphor WaterBoss 400 advantages:
1. Control valve. Quiet and reliable. Provides smooth operation and filter regeneration.
2. The programmable controller has an intelligent control system and flexible settings. Thanks to a redundant power supply, it retains settings for up to 7 days in the event of a power outage.
3. Built-in self-cleaning filter, retains mechanical particles up to 20 microns in size (this is less than what the human eye perceives), does not require replacement of cartridges.
4. The shut-off valve reliably protects against overflow.
5. Super fine resin. The unique design of the filtration unit and flow distributor allows the use of super fine resin and counter-current regeneration with clean water in a compressed bed.
6. The mesh installed in the brine tank allows you to obtain a clean brine of the desired concentration.
Ion exchange resin: WaterBoss softeners use a monodisperse ion exchange resin with a bead diameter of about 0.2 mm. A narrow fractional composition in combination with a small granule size makes it possible to obtain a sorption (ion-exchange) medium with a very low hydrodynamic resistance and a very high kinetics of the ion-exchange reaction. The use of such an ion exchange resin in conventional bulk columns is not possible, since the standard “slits” at the column inlet and outlet have a slot size of 0.5 mm. Construction: The ion exchange resin in WaterBoss is tightly packed between two polymer meshes with a mesh size of 20 microns and an area close to the column diameter. Due to this, there are no parasitic stagnant resin volumes that are not involved in the filter. Efficiency of regeneration: The WaterBoss system implements counter-current regeneration "in the clamped layer", which is impossible with free filling of resin due to the floating effect. This achieves significant - up to 70% - saving of salt during regeneration.
.png)
Unique compactness, modern design and high performance characteristics make it possible to use AQUAPHOR WaterBoss 400 even where a special place was not provided in advance. Another indicator - the extremely small amount of water consumed for regeneration - is very important in the presence of a local sewerage system and a water meter. The AQUAPHOR WaterBoss softening and iron removal system is simple and easy to maintain, and also outperforms conventional water softeners in all major categories. Once installed, the system only requires periodic refilling with salt.
Specifications:
• AQUAPHOR WaterBoss 400 effectively purifies water with iron and manganese content up to 3 mg / l and hardness up to 15 mg-eq / l.
• Productivity slave / max, m3 / hour 1.5 / 2.4
• Max. compensated hardness 11 mEq / l
• The amount of salt per regeneration is 0.5-1.4 kg
• Duration of regeneration 12-18 minutes
• The amount of water for one regeneration is 36-50 l
• Connection sizes 3/4 "
• Valve flow area 1 "
• Possible salt reserve 14 kg
• Amount of sorbent 11l
• Electrical characteristics 12 VAC, 1 phase 50 Hz
• Max. water temperature 48 ° С
• Water pressure (min - max, atm) 1.4 - 8
• Base area: 29 x 47 cm
• Height 55 cm Weight 25 kg
Aquaphor WaterBoss 400 - designed for water softening, manufactured by order of Aquaphor by the American company "Hague Quality Water International" (Water Boss). This softener is used to remove hardness ions of magnesium and calcium, remove manganese and iron from the water of local and municipal water supply networks (wells, artesian wells, etc.)
How the WaterBoss water purification system works
The main advantage of the new model is its ultra-compact dimensions, which provide ease of placement and installation and save space in your home or apartment. At the same time, in terms of efficiency, this "crumb" is practically in no way inferior to its "large" brothers.
Aquaphor WaterBoss 400 is designed to provide your families with clean, soft, delicious water. For its creation, the best materials and modern equipment were used, which ensures the smooth operation of the system for many years.
The filter is certified according to the Water Quality Association S-100 standard, which is confirmed by the Gold Seal of the Water Quality Association. All electrical products and components used are CSA and UL listed, and all water-contacting components are FDA-listed. The materials from which the softener is made are non-toxic, absolutely safe and do not emit any substances into the water that pose a danger to human health and the environment. The filter fully meets the requirements of the technical regulations TR CU 010/2011.
Aquaphor WaterBoss 400 advantages:
1. Control valve. Quiet and reliable. Provides smooth operation and filter regeneration.
2. The programmable controller has an intelligent control system and flexible settings. Thanks to a redundant power supply, it retains settings for up to 7 days in the event of a power outage.
3. Built-in self-cleaning filter, retains mechanical particles up to 20 microns in size (this is less than what the human eye perceives), does not require replacement of cartridges.
4. The shut-off valve reliably protects against overflow.
5. Super fine resin. The unique design of the filtration unit and flow distributor allows the use of super fine resin and counter-current regeneration with clean water in a compressed bed.
6. The mesh installed in the brine tank allows you to obtain a clean brine of the desired concentration.
Ion exchange resin: WaterBoss softeners use a monodisperse ion exchange resin with a bead diameter of about 0.2 mm. A narrow fractional composition in combination with a small granule size makes it possible to obtain a sorption (ion-exchange) medium with a very low hydrodynamic resistance and a very high kinetics of the ion-exchange reaction. The use of such an ion exchange resin in conventional bulk columns is not possible, since the standard “slits” at the column inlet and outlet have a slot size of 0.5 mm. Construction: The ion exchange resin in WaterBoss is tightly packed between two polymer meshes with a mesh size of 20 microns and an area close to the column diameter. Due to this, there are no parasitic stagnant resin volumes that are not involved in the filter. Efficiency of regeneration: The WaterBoss system implements counter-current regeneration "in the clamped layer", which is impossible with free filling of resin due to the floating effect. This achieves significant - up to 70% - saving of salt during regeneration.
Unique compactness, modern design and high performance characteristics make it possible to use AQUAPHOR WaterBoss 400 even where a special place was not provided in advance. Another indicator - the extremely small amount of water consumed for regeneration - is very important in the presence of a local sewerage system and a water meter. The AQUAPHOR WaterBoss softening and iron removal system is simple and easy to maintain, and also outperforms conventional water softeners in all major categories. Once installed, the system only requires periodic refilling with salt.
Specifications:
• AQUAPHOR WaterBoss 400 effectively purifies water with iron and manganese content up to 3 mg / l and hardness up to 15 mg-eq / l.
• Productivity slave / max, m3 / hour 1.5 / 2.4
• Max. compensated hardness 11 mEq / l
• The amount of salt per regeneration is 0.5-1.4 kg
• Duration of regeneration 12-18 minutes
• The amount of water for one regeneration is 36-50 l
• Connection sizes 3/4 "
• Valve flow area 1 "
• Possible salt reserve 14 kg
• Amount of sorbent 11l
• Electrical characteristics 12 VAC, 1 phase 50 Hz
• Max. water temperature 48 ° С
• Water pressure (min - max, atm) 1.4 - 8
• Base area: 29 x 47 cm
• Height 55 cm Weight 25 kg